Wide Base KM 650 with Sleeve Impact Press

650.00  +KDV

SKU:: KM 650

Wide Base KM 650 with Sleeve Impact Press Our KM 650 lever impact press consists of cast iron and is processed by our expert team on our cnc machines. The machine consists of two cast parts, height adjustment can be made. Iron parts are produced by heat treatment and irrigation. Our machine is very easy […]

Description

Wide Base KM 650 with Sleeve Impact Press

Our KM 650 lever impact press consists of cast iron and is processed by our expert team on our cnc machines. The machine consists of two cast parts, height adjustment can be made. Iron parts are produced by heat treatment and irrigation.

Our machine is very easy to use the upper and lower mold is installed after the center adjustment is made ready to use the center adjustment of the upper part of the upper part of the body is loosened by loosening the screw is only left to right and height adjustment is made from the apparatus to which the lower mold can be adjusted to stand forward from the front. After setting, you can perform the stitching process after placing the material in the upper and lower slot.

Mold change is a 1 minute process. The maintenance of the machine is very simple and is carried out by the lubrication process after it has been cleaned up and down with the grease oil.

CHANGING THE BODY POSITION
KM 650 The body of the manual impact press (25) is designed to change its height and rotate 360 ​​degrees around the column shaft (33). In order to bring the body to the desired position, the collar (35) is loosened with the butterfly nut (36). Then the housing is loosened with the screw (26). The body is fixed at the desired height and fixed.

Areas of use

Reklam verenler, işaretçiler, afişler, delikler, tekstil, kaşlar, perçinler, düğme kaplamaları, kancalar, çıtçıtlar, perçinler, kıvrımlar, vb. İşlerinizde, elektrik ve elektronik montajında ​​kapı ve pencerelerin montajında; işinizde alüminyum, panjur, ambalaj vb. trafik plakası kaydı; işaretleme vb. otomotiv ve baskı, zımbalama, zımbalama, etek bükme, sabitleme, kozmetik ve oyuncak montajında ​​kullanılır. Tüm çalışmalarınız için kalıp değiştirmek için tek bir makine kullanabilirsiniz.

Teknik Özellikler
Darbe Gücü: maks. 1300 kg / cm2
Ray Yüksekliği: 320 mm.
Kolon Çapı: Ø 36 mm.
Milleri Arası: 138 mm
Tablo Genişliği: 160 x 160 mm
Anahtar deliği: Ø 9 mm.
T kanalları: 8 H 12 DIN 650
Boyutlar: 640 X 380 X 170 mm
Ağırlık: 21 kg.

Sleeve Impact Press’li Geniş Taban KM 650

Kol darbe makineleri üreten firmamız kaliteden ödün vermez.

Additional information

Weight 21 kg

Reviews

There are no reviews yet.

Be the first to review “Wide Base KM 650 with Sleeve Impact Press”

Your email address will not be published. Required fields are marked *

X